Hi!
I have an Sidewinder 3D Pro Plus and i build this adapter . but i cant get it to work
After flashing the Teensy 2.0 Board with the Hexfile and rebooting the teensy with only the teensy connected to the pc (without the pcb and the joystick) should it be recognized from windows 7 ? (led is flashing) My teensy is only recognized from Win7 during flashing!
thanks in advance and many thanx for the layout and the hexfile!
Here is the log from the Teensyloader : (is this ok ? : Error: can't open file 'D:\sidewinder\3DPro32u4-9.elf' )
18:19:33: Open File event
18:19:45: File "3DPro32u4-9.hex". 4262 bytes, 13% used
18:19:50: Verbose Info event
18:19:58: Program event
18:19:58: File "3DPro32u4-9.hex". 4262 bytes, 13% used
18:19:58: Error: can't open file 'D:\sidewinder\3DPro32u4-9.elf' (error 2: das System kann die angegebene Datei nicht finden.)
18:19:58: Code size from .elf file = 0
18:19:58: begin operation
18:19:58: flash, block=0, bs=128, auto=0
18:19:58: flash, block=1, bs=128, auto=0
18:19:58: flash, block=2, bs=128, auto=0
18:19:58: flash, block=3, bs=128, auto=0
18:19:58: flash, block=4, bs=128, auto=0
18:19:58: flash, block=5, bs=128, auto=0
18:19:58: flash, block=6, bs=128, auto=0
18:19:58: flash, block=7, bs=128, auto=0
18:19:58: flash, block=8, bs=128, auto=0
18:19:58: flash, block=9, bs=128, auto=0
18:19:58: flash, block=10, bs=128, auto=0
18:19:58: flash, block=11, bs=128, auto=0
18:19:58: flash, block=12, bs=128, auto=0
18:19:58: flash, block=13, bs=128, auto=0
18:19:58: flash, block=14, bs=128, auto=0
18:19:58: flash, block=15, bs=128, auto=0
18:19:58: flash, block=16, bs=128, auto=0
18:19:58: flash, block=17, bs=128, auto=0
18:19:58: flash, block=18, bs=128, auto=0
18:19:58: flash, block=19, bs=128, auto=0
18:19:58: flash, block=20, bs=128, auto=0
18:19:58: flash, block=21, bs=128, auto=0
18:19:58: flash, block=22, bs=128, auto=0
18:19:58: flash, block=23, bs=128, auto=0
18:19:58: flash, block=24, bs=128, auto=0
18:19:58: flash, block=25, bs=128, auto=0
18:19:58: flash, block=26, bs=128, auto=0
18:19:58: flash, block=27, bs=128, auto=0
18:19:58: flash, block=28, bs=128, auto=0
18:19:58: flash, block=29, bs=128, auto=0
18:19:58: flash, block=30, bs=128, auto=0
18:19:58: flash, block=31, bs=128, auto=0
18:19:58: flash, block=32, bs=128, auto=0
18:19:58: flash, block=33, bs=128, auto=0
18:19:58: end operation
18:19:58: redraw timer set, image 12 to show for 1500 ms
18:20:00: redraw, image 10
18:20:02: Reboot event
greets
DeCi