Would you want a 6-8\" pyro on your desk

The artists and authors forum! NOTE: © original author - do not use w/out consent!

Moderators: MetalBeast, Capm

=Tempest=
DBB Ace
DBB Ace
Posts: 47
Joined: Sat Aug 12, 2006 9:26 am

Post by =Tempest= »

Will that model be released publicly? I'd love to put it into Freespace 2. A cockpitted pyro would be loads of fun to fly around. If it's not more difficult, it'd be nice if the map was all in one texture, too.

It'd be a shame for that beauty to not to be flown around! Keep it up!

I'm probably going to end up buying one of these...
Sllik
DBB Ace
DBB Ace
Posts: 473
Joined: Thu Nov 05, 1998 12:01 pm
Location: Dallas, TX
Contact:

Post by Sllik »

Just as a side-suggestion, once this initiative is done...

We should take an altered version of the completed desk pyro to be used as a trophy, start up a new ladder, and make the trophies your prize for winning. ;)
User avatar
BUBBALOU
DBB Benefactor
DBB Benefactor
Posts: 4198
Joined: Tue Aug 24, 1999 2:01 am
Location: Dallas Texas USA
Contact:

Post by BUBBALOU »

Well I am back.. had to replace a power supply after some troubleshooting on my main rigg

sorry for lack of updates

in chat someone who shall remain the Nameless Zoob! that he is, commented that other pyro's looked more realistic than the DBB Untextured Desk Model.
I replied... this is going to be cast into plastic, so it does not require textures.

ImageImageImageImageImageImageImage

So with that in mind, let's put that statement to the test!!!!!@@@ Shall We!! I Dug through an Online Archive and rendered some untextured models that I found. Some of which are not available to the Public!

The Pyro's shall remain Nameless... the rest is history

\"Smoke a Zoob\" go's out to the Idea behind this post! :P

{ninja edit] it will be updated with 5 versions in a day
User avatar
CDN_Merlin
DBB_Master
DBB_Master
Posts: 9774
Joined: Thu Nov 05, 1998 12:01 pm
Location: Capital Of Canada

Post by CDN_Merlin »

I like the 3rd one in each pic except from pic #2 I like the 1st one.
CritterB
DBB Ace
DBB Ace
Posts: 261
Joined: Thu Jul 22, 1999 2:01 am
Location: Gainesville, FL

Post by CritterB »

Aren't those the same ones from a front and back view? Either way, I agree that I like that one best as well and since I have been following this thread but not posting I want one of these too. Keep up the good work Bubba. ~
User avatar
Phaser
DBB Ace
DBB Ace
Posts: 249
Joined: Fri Aug 17, 2001 2:01 am
Location: Texas
Contact:

Post by Phaser »

AWESOME bubba! :D
Why do men claim to wear the pants in the family? Because we wont let them wear our dresses
User avatar
Aus-RED-5
DBB Friend
DBB Friend
Posts: 1604
Joined: Fri Apr 23, 2004 7:27 am
Location: Adelaide, South Australia
Contact:

Post by Aus-RED-5 »

Uhhhh... what's the go with this project?

Bubba,
Have you heard from KB about the next step?

Is he even checking any of his projects here anymore? :?
User avatar
KoolBear
DBB Co-Founder
DBB Co-Founder
Posts: 10132
Joined: Thu Nov 05, 1998 12:01 pm
Location: Houston, TX USA
Contact:

Post by KoolBear »

Let's do it ... ;)
User avatar
BUBBALOU
DBB Benefactor
DBB Benefactor
Posts: 4198
Joined: Tue Aug 24, 1999 2:01 am
Location: Dallas Texas USA
Contact:

Post by BUBBALOU »

you're back, ready willing and able I hope?

Good, I'm almost done reinstalling everything on my PC - which was corrupted by a embedded DRM file hidden in an driver update from Microsoft Windows update site claiming to be one from Creative.

Been 1 1/2 weeks so far...

Koolbear - 3proVerts units/boards then This -- status?



One Page to View Now Pyro - GX
User avatar
CDN_Merlin
DBB_Master
DBB_Master
Posts: 9774
Joined: Thu Nov 05, 1998 12:01 pm
Location: Capital Of Canada

Re:

Post by CDN_Merlin »

BUBBALOU wrote:you're back, ready willing and able I hope?

Good, I'm almost done reinstalling everything on my PC - which was corrupted by a embedded DRM file hidden in an driver update from Microsoft Windows update site claiming to be one from Creative.

Been 1 1/2 weeks so far...
You let Windows Update install hardware drivers? tsk tsk.
User avatar
Aus-RED-5
DBB Friend
DBB Friend
Posts: 1604
Joined: Fri Apr 23, 2004 7:27 am
Location: Adelaide, South Australia
Contact:

Re:

Post by Aus-RED-5 »

KoolBear wrote:Let's do it ... ;)
Yes, please!

BTW - Welcome back KB! :)
User avatar
KoolBear
DBB Co-Founder
DBB Co-Founder
Posts: 10132
Joined: Thu Nov 05, 1998 12:01 pm
Location: Houston, TX USA
Contact:

Post by KoolBear »

Thank You Aus ...

Bubba ... ;)
User avatar
CDN_Merlin
DBB_Master
DBB_Master
Posts: 9774
Joined: Thu Nov 05, 1998 12:01 pm
Location: Capital Of Canada

Post by CDN_Merlin »

Any status update on this? I still want one.
User avatar
Aus-RED-5
DBB Friend
DBB Friend
Posts: 1604
Joined: Fri Apr 23, 2004 7:27 am
Location: Adelaide, South Australia
Contact:

Post by Aus-RED-5 »

Me too. :cry:
Spooky
DBB Ace
DBB Ace
Posts: 251
Joined: Tue Apr 25, 2006 2:27 pm

Post by Spooky »

User avatar
BUBBALOU
DBB Benefactor
DBB Benefactor
Posts: 4198
Joined: Tue Aug 24, 1999 2:01 am
Location: Dallas Texas USA
Contact:

Post by BUBBALOU »

pyro model is 2nd to the 3dpro adapter run

models have been ready since July of last year (2007) then i put next stage in motion when i began work on the pilot - but had to stop, and began waiting for a response from KB. I have since given up on that, and continued on my sideline project of an extremely detailed and ready for film gx model.

yes the lowpoly cad model for the desktop model has been ready since last year

I seem to have a better workout dodging your stupidity than attempting to grasp the weight of your intelligence.
Spooky
DBB Ace
DBB Ace
Posts: 251
Joined: Tue Apr 25, 2006 2:27 pm

Post by Spooky »

User avatar
Aus-RED-5
DBB Friend
DBB Friend
Posts: 1604
Joined: Fri Apr 23, 2004 7:27 am
Location: Adelaide, South Australia
Contact:

Re:

Post by Aus-RED-5 »

Spooky wrote:.... a physical model that a person can pick up and walk off with that is meant to be displayed on an actual desk, desktop. :blush:
That's the one. ;)
User avatar
Spaceboy
DBB Captain
DBB Captain
Posts: 603
Joined: Sat Oct 02, 2004 11:43 pm
Contact:

Post by Spaceboy »

Whatever happened with this?

Seemed like everyone was very into this for like a week, then gave up on it.

How strange. This would be awesome if it happened though.
Valin Halcyon
DBB Admiral
DBB Admiral
Posts: 1113
Joined: Sun Jan 02, 2000 3:01 am

Post by Valin Halcyon »

I'd very much like a 12\" Pyro-GX (Eagle's). Did this project just evaporate?

At least I still have all the original max and 3ds files for Eagle's GX. The reason ours came out so well was because, well, I was rather anal about the detail and so was Eagle. :P We used an enoumous number of screenshots from D2's intro/outro and escape/arrival videos to get all the elements together. We added the concussion missiles because, quite honestly, the GX looks weird without them. I don't know how we missed the missile mounts...they were there in the intro movie, clearly visible.

When we had finished the ship, we took some renders and sent them to the fellow over at Volition who had been the guy that was going to do the original D4 Pyro-GX. His response was golden... \"Better than the original...\". Eagle was, how should we say, in a state of euphoria for some weeks after that. :P
User avatar
Spaceboy
DBB Captain
DBB Captain
Posts: 603
Joined: Sat Oct 02, 2004 11:43 pm
Contact:

Post by Spaceboy »

Seems like nobody took any actual steps to do anything except for the 3d model guys, I wonder why it's still stickied.
User avatar
Isaac
DBB Artist
DBB Artist
Posts: 7736
Joined: Mon Aug 01, 2005 8:47 am
Location: 🍕

Re:

Post by Isaac »

Spaceboy wrote:Seems like nobody took any actual steps to do anything except for the 3d model guys, I wonder why it's still stickied.
I like to see koolbear's posts on the first page of forum sections. This whole site will only survive for so long.
User avatar
KoolBear
DBB Co-Founder
DBB Co-Founder
Posts: 10132
Joined: Thu Nov 05, 1998 12:01 pm
Location: Houston, TX USA
Contact:

Post by KoolBear »

Image

I have two! Nearly lost my job printing the second one. We need some to create a mold so we can cast these!
User avatar
sdfgeoff
DBB Ace
DBB Ace
Posts: 498
Joined: Wed Jan 12, 2011 1:07 am
Location: Low Earth Orbit
Contact:

Re: Would you want a 6-8\" pyro on your desk

Post by sdfgeoff »

WOW something finally happened here.
They look awesome, and I would love to help, but I have no idea how to make molds...
Did you do those by 3D printing? Well, I suppose it was, there is no other way.

I actually thing that that shape is a bit complex for one mold. I think you would need a few:
1) Main fuselage, cockpit, engines and lower wings (you may actually have to do the lower wings separately too, but I'm not sure)
2) 2 left hand lasers
3) 2 right hand lasers
4) Upper wing
5) Other upper wing

When It's done I'll probably buy one.
Eh?
User avatar
Isaac
DBB Artist
DBB Artist
Posts: 7736
Joined: Mon Aug 01, 2005 8:47 am
Location: 🍕

Re: Would you want a 6-8\" pyro on your desk

Post by Isaac »

WWWOOOOOW!!! AMAZING! :mrgreen:
❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉
-⎽__⎽-⎻⎺⎺⎻-⎽__⎽--⎻⎺⎺⎻-★ ·:*¨༺꧁༺ :E ༻꧂༻¨*:·.★-⎽__⎽-⎻⎺⎺⎻-⎽__⎽--⎻⎺⎺⎻-
❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉
User avatar
Aus-RED-5
DBB Friend
DBB Friend
Posts: 1604
Joined: Fri Apr 23, 2004 7:27 am
Location: Adelaide, South Australia
Contact:

Re: Would you want a 6-8\" pyro on your desk

Post by Aus-RED-5 »

They look like candy! lol

ummm candy pyrossss..... Image
Prepare for DESCENT!
User avatar
Isaac
DBB Artist
DBB Artist
Posts: 7736
Joined: Mon Aug 01, 2005 8:47 am
Location: 🍕

Re: Would you want a 6-8\" pyro on your desk

Post by Isaac »

Aus-RED-5 wrote:They look like candy! lol

ummm candy pyrossss..... Image
OHH! I WOULD SOOOO EAT A PYRO!!
❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉
-⎽__⎽-⎻⎺⎺⎻-⎽__⎽--⎻⎺⎺⎻-★ ·:*¨༺꧁༺ :E ༻꧂༻¨*:·.★-⎽__⎽-⎻⎺⎺⎻-⎽__⎽--⎻⎺⎺⎻-
❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉❉⊱•═•⊰❉⊱•═•⊰❉⊱•═•⊰❉
Ryujin
DBB DemiGod
DBB DemiGod
Posts: 2102
Joined: Thu Nov 29, 2001 3:01 am

Re: Would you want a 6-8\" pyro on your desk

Post by Ryujin »

I eat pyros for breakfast. :twisted:

I'd still love to have one of these on my desk. Let us know how we can help.
User avatar
KoolBear
DBB Co-Founder
DBB Co-Founder
Posts: 10132
Joined: Thu Nov 05, 1998 12:01 pm
Location: Houston, TX USA
Contact:

Re: Would you want a 6-8\" pyro on your desk

Post by KoolBear »

Help me find someone that can cast it.
User avatar
Aus-RED-5
DBB Friend
DBB Friend
Posts: 1604
Joined: Fri Apr 23, 2004 7:27 am
Location: Adelaide, South Australia
Contact:

Re: Would you want a 6-8\" pyro on your desk

Post by Aus-RED-5 »

Prepare for DESCENT!
User avatar
Thenior
DBB Captain
DBB Captain
Posts: 667
Joined: Wed Oct 06, 2004 9:40 am

Re: Would you want a 6-8\" pyro on your desk

Post by Thenior »

I asked the guys over @ polycount. I've seen some impressive stuff come from those guys.

http://www.protodemon.com/quote/
http://robotthecompany.com/

Those are the people they recommended.
Ryujin
DBB DemiGod
DBB DemiGod
Posts: 2102
Joined: Thu Nov 29, 2001 3:01 am

Re: Would you want a 6-8\" pyro on your desk

Post by Ryujin »

Maybe we can get some free quotes from these guys KB?
User avatar
Sarrus
DBB Cadet
DBB Cadet
Posts: 9
Joined: Thu Oct 28, 2010 2:13 pm
Location: Somewhere, Michigan, USA
Contact:

Re: Would you want a 6-8\" pyro on your desk

Post by Sarrus »

I've kind of hoped for a number of years that this would eventually work out... any word on progress?
Post Reply